Microsoft Windows Embedded Partner - WEPP


Main features

  • Support 1 port 10/100/1000Base-T(X) P.S.E. auto-negotiation and auto-MDI/MDI-X copper port
  • Support 1 port 100/1000Base-X SFP fiber port
  • P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts
  • Support Jumbo Frame up to 9K Bytes
  • Support LFP (Link Fault Pass-through) function
  • Relay output to carry capacity of 1A at 24 VDC for warning system
  • Provided DIP-Switch to setting function
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled


The IGPMC-111GP is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGPMC-111GP supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IGPMC-111GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPMC-111GP has 1x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. The IGPMC-111GP also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGPMC-111GP will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. The IGPMC-111GP with wide operating temperature range from -40 ~ 75°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the IGPMC-111GP is reliable media converter with PoE capability and can satisfy most demand of operating environment.


ORing Media Converter Model IGPMC-111GP
Physical Ports  
10/100/1000 Base-T(X) P.S.E. Port in RJ45 Auto MDI/MDIX 1
100/1000Base-X SFP port 1
Ethernet Standards IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.3z for 1000Base-XIEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
Jumbo Frame 9K Bytes (1G mode only)
LED Indicators  
Power / Ready Indicator Green: Power LED x 2
LFP statue indicator Amber LED ? (ON) LFP function fail / (OFF) LFP function disable
100/1000Base-X SFP Port Indicator Green for port Link/Act
10/100/1000Base-T(X) Port Duplex Mode Indicator Green LED ? (ON) Full-duplex mode / (OFF) Half-Duplex mode
10/100/1000Base-T(X) RJ45 port Indicator Green for Link/ActDual color LED for speed ? Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps
Fault Indicator (Fault) Amber: Indicate unexpected event occurred
PoE indicator Green: Power is supplied over Ethernet cable.
Fault Contact  
Relay Relay output to carry capacity of 1A at 24 VDC
Input Power Dual 50 ~ 57 VDC voltage power inputs in 4-pin terminal block
Power Consumption (Typ.) 4Watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 40 (W) x70 (D) x 95 (H) mm
Weight (g) 291g
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75°C (40 to 167°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years