Industrial VPN Router with 2x10/100/1000Base-T(X)
Main features
- Provide 2 port 10/100/1000Base-T(X) port
- Secured Management by HTTPs
- Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE
- IP table to prevent access from unauthorized IP address
- Support VPN for secured network connection (Open VPN, PPTP, IPSEC, VPN)
- Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
- Versatile modes & event alarm by e-mail
- 1KV isolation for PoE P.D. port (IGR-20+)
- Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
- Rigid IP-30 housing design
- DIN-Rail and Wall-mount enabled
Overview
IGR-20 series is a reliable VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 2 modes of routing function: Dynamic/Static IP route, PPPoE authentication. In addition, IGR-20+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGR-20+ is one of the best solution for applications of VPN connection.
Specifications
| ORing Router Model | IGR-20 | IGR-20+ |
| Physical Ports | |
| 10/100/1000 Base-T(X) Ports in RJ45Auto MDI/MDIX | 2 |
| Sim Card Slot | - | Present at ETH2Fully compliant with IEEE 802.3af Power DevicespecificationOver load & short circuit protectionIsolation Voltage: 1000 VDC min.Isolation Resistance : 108 ohms min |
| 5-Pin Terminal Block | 2(DI x 4 and DO x 4) :Dry Contact:On: short to GND, Off: openWet Contact (DI to COM/GND):On: 0 to 3VDC, Off: 10 to 30VDC |
| LED Indicators | |
| Power Indicator | 3 x LEDs, PWR1(2)(PoE) / Ready:Red On : Power is on and booting upGreen On : Power is on and functioning Normal |
| 10/100/1000T RJ45 port indicator | 2 x LEDs,LNK/ACT:Green for port Act.Speed: Green for port Link at 1000MbpsAmber for port Link at 100Mbps.Off for port Link at 10Mbps |
| Fault | 1 x LED, Red for Ethernet link down or power down indicator |
| Fault Contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Redundant Input power | Dual DC inputs. 12-48VDC on 6-pin terminal block |
| Power Consumption | 4 Watts | 5 Watts |
| Overload current protection | Present |
| Reverse polarity protection | Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.) |
| Weight (g) | 845 g | 850 g |
| Environmental | |
| Storage Temperature | -40 to 85°C(-40 to 185°F) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | 5 years |
