intel-vpro-platform.png

Microsoft Windows Embedded Partner - WEPP

IAR-142+-4G_EU

Reliable IEEE 802.11b/g/nWLAN VPN router with2ports10/100Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in3 modes of routing function:Dynamic/Static IP route,PPPoE authentication,and Modem dialup. In the mode of Modem dialup, it support GPRS/3G/3.5G/LTE modem by internal 4G LTE module.

Main features

  • High Speed Air Connectivity: WLAN interface support up to 150Mbps link speed
  • Provide 2 port 10/100Base-T(X) port and 1 sim card slot
  • 4G LTE Modem dial up included
  • Provide HNAT enhance LAN to WAN routing performance
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Secured Management by HTTPs
  • Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE, Modem/Dial Up
  • IP table to prevent access from unauthorized IP address
  • Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
  • Versatile modes & event alarm by e-mail
  • 1KV isolation for PoE P.D. port of IAR-142+-4G
  • Event Warning by Syslog, Email, SNMP Trap
  • Rigid IP-30 housing design
  • DIN-Rail and Wall-mount enabled

Overview

IAR-142(+)-4G is a reliable IEEE 802.11b/g/nWLAN VPN router with2ports10/100Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in3 modes of routing function:Dynamic/Static IP route,PPPoE authentication,and Modem dialup. In the mode of Modem dialup, it support GPRS/3G/3.5G/LTE modem by internal 4G LTE module. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modems. Inaddition, IAR-142+-4G also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3afPoEP.D. specification. This feature extends the layout up to 100 meters. Therefore, IAR-142+-4G is one of the best solution for applications of wireless communication.

Specifications

ORing AP Router Model IAR-142-4G IAR-142+-4G
Physical Ports  
10/100 Base-T(X) Ports in RJ45Auto MDI/MDIX 2
PoE P.D. Port - Present at ETH1Fully compliant with IEEE 802.3af PowerDevice specificationOver load & short circuit protectionIsolation Voltage: 1000 VDC min.Isolation Resistance : 108 ohms min
Sim Card Slot 1
Cellular Interface  
Antenna Connector 2 x SMA Female
Cellualr Standard GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA /LTE
Band Option America(US grade)LTE:1900(B2)/1700(B4)/850(B5)/700(B13)/700(B17)/1900(B25) MHzCDMA/EVDO rev. a/b:800/1900UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:850/900/1700/1900/2100 MHzGSM/GPRS/EDGE:850/900/1800/1900 MHzEurope(EU grade)LTE:2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20) MHzUMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:800/850/900/1900/2100 MHzGSM/GPRS/EDGE:850/900/1800/1900 MHz
WLAN Interface  
Antenna Connector 1 x Reverse SMA Female
Modulation IEEE802.11b: CCK/DQPSK/DBPSKIEEE802.11g: OFDMIEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band America / FCC:2.412~2.462 GHz (11 channels)Europe CE / ETSI:2.412~2.472 GHz (13 channels)
Transmission Rate 802.11b: 1/2/5.5/11 Mbps802.11g: 6/9/12/18/24/36/48/54 Mbps802.11n(40MHz): UP to 150 Mbps
Transmit Power 802.11b: 19dBm ±1.5dBm802.11g: 17dBm ±1.5dBm802.11n(2.4G@20MHz): 16dBm ±1.5dBm802.11n(2.4G@40MHz): 14dBm ±1.5dBm
Receiver Sensitivity 802.11b: -90dBm ±2dBm@1Mbps802.11g: -72dBm ±2dBm@54Mbps802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm
Encryption Security WEP: (64-bit ,128-bit key supported)WPA/WPA2 :802.11i(WEP and AES encryption)WPA-PSK (256-bit key pre-shared key supported)802.1X Authentication supportedTKIP encryption
Wireless Security SSID broadcast disable
LED Indicators  
Power Indicator 3 x LEDs, PWR1(2)(PoE)Green On: Power is on and functioning Normally.
10/100T RJ45 port indicator 2 x LEDs, Green for port Link/Act at 100Mbps.
WLAN LEDs 1 x LED, Green: WLAN Link /ACT
WAN LEDs 1 x LED, Green On : Power is on and functioning Normal
Power  
Redundant Input Power Dual DC inputs. 12-48VDC on 4-pin terminal block
Power Consumption (Typ.) 3 Watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 45(W)x80.6(D)x95(H) mm
Weight (g) 360g 365g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 60°C(14 to 140°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 3 years