Intel Technology Provider Gold 2019

Microsoft Windows Embedded Partner - WEPP

IGAR-2062+-4G_EU

IGAR-2062+-4G is a reliable IEEE 802.11 a/b/g/n WLAN VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem dial up. In the mode of Modem dial up, it support GPRS/3G/3.5G/LTE modem by internal cellular module.

Main features

  • High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
  • Provide 2 port 10/100/1000Base-T(X) port and 2 sim card slot
  • Support dual 3.5G HSDPA dial up backup and land balance
  • Provide HNAT enhance LAN to WAN routing performance
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Secured Management by HTTPs
  • Support STP(802.1D) for wireless redundancy
  • Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE, Modem/Dial Up
  • Support client operating mode
  • Versatile modes & event alarm by e-mail
  • 1KV isolation for PoE P.D. port
  • Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
  • Rigid IP-30 housing design
  • DIN-Rail and Wall-mount enabled

Overview

IGAR-2062+-4G is a reliable IEEE 802.11 a/b/g/n WLAN VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem dial up. In the mode of Modem dial up, it support GPRS/3G/3.5G/LTE modem by internal cellular module. Users can set up WLAN environment to fulfill demands of various applications rapidly by dual SIM dialing up cellular modems. In addition, IGAR-2062+-4G provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGAR-2062+-4G is one of the best solution for applications of wireless communication.

Specifications

ORing AP Model IGAR-2062+-4G
Physical Ports  
10/100/1000 Base-T(X) Ports in RJ45Auto MDI/MDIX 2
5-Pin Terminal Block 2(DI x 4 and DO x 4) :Dry Contact:On: short to GND, Off: openWet Contact (DI to COM/GND):On: 0 to 3VDC, Off: 10 to 30VDC
PoE P.D. Port Present at ETH2Fully compliant with IEEE 802.3af Power Device specificationOver load & short circuit protectionIsolation Voltage: 1000 VDC min.Isolation Resistance : 108 ohms min
Sim Card Slot 2
Cellular Interface  
Antenna Connector 2 x SMA Female
Cellualr Standard GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA /HSPA+ / LTE
Band Option America(US grade)LTE:1900(B2)/1700(B4)/850(B5)/700(B13)/700(B17)/1900(B25) MHzCDMA/EVDO rev. a/b:800/1900UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:850/900/1700/1900/2100 MHzGSM/GPRS/EDGE:850/900/1800/1900 MHzEurope(EU grade)LTE:2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20) MHzUMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:800/850/900/1900/2100 MHzGSM/GPRS/EDGE:850/900/1800/1900 MHz
WLAN Interface  
Antenna Connector 2 x Reverse SMA Female
Modulation IEEE802.11b: CCK/DQPSK/DBPSKIEEE802.11a/g: OFDMIEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band America / FCC:2.412~2.462 GHz (11 channels )5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels )Europe CE / ETSI:2.412~2.472 GHz (13 channels)5.180~5.240 GHz (4 channels)
Transmission Rate 802.11b: 1/2/5.5/11 Mbps802.11a/g: 6/9/12/18/24/36/48/54 Mbps802.11n(40MHz): UP to 300 Mbps
Transmit Power 802.11a: 12dBm ± 1.5dBm@802.11b: 17dBm ± 1.5dBm@11Mbps802.11g: 16dBm ± 1.5dBm@54Mbps802.11gn HT20: 15dBm ± 1.5dBm@MCS7802.11gn HT40: 14dBm ± 1.5dBm@MCS7802.11an HT20: 12dBm ± 1.5dBm@MCS7802.11an HT40: 11dBm ± 1.5dBm@MCS7
Receiver Sensitivity 802.11a : -76dBm ± 2dBm@54Mbps802.11b : -85dBm ± 2dBm@11Mbps802.11g : -76dBm ± 2dBm@54Mbps802.11gn HT20:-75dBm ± 2dBm@MCS7802.11gn HT40:-72dBm ± 2dBm@MCS7802.11an HT20:-74dBm ± 2dBm@MCS7802.11an HT40:-71dBm ± 2dBm@MCS7
Encryption Security WEP: (64-bit ,128-bit key supported)WPA/WPA2 :802.11i(WEP and AES encryption)WPA-PSK (256-bit key pre-shared key supported)802.1X Authentication supportedTKIP encryption
Wireless Security SSID broadcast disable
LED Indicators  
Power Indicator 3 x LEDs, PWR1(2)(PoE) / Ready:Red On : Power is on and booting upGreen On : Power is on and functioning Normal
10/100/1000Base-T(X) RJ45 Port Indicator 2 x LEDs,LNK/ACT:Green for port Act.Speed: Green for port Link at 1000MbpsAmber for port Link at 100Mbps.Off for port Link at 10Mbps.
WLAN LEDs Green Solid On: RF on, Blink: data transmittingGreen for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
WAN LEDs 2 x LEDs, Green On : Power is on and functioning Normal
Fault 1 x LED, Red for Ethernet link down or power down indicator
Fault Contact  
Relay Relay output to carry capacity of 1A at 24VDC
Power  
Redundant Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 15 Watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight (g) 1155 g
Environmental  
Storage Temperature -40 to 85°C(-40 to 185°F)
Operating Temperature -25 to 70°C(-13 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years