Intel Technology Provider Gold 2019

Microsoft Windows Embedded Partner - WEPP

IGR-20

Industrial VPN Router with 2x10/100/1000Base-T(X)

Main features

  • Provide 2 port 10/100/1000Base-T(X) port
  • Secured Management by HTTPs
  • Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE
  • IP table to prevent access from unauthorized IP address
  • Support VPN for secured network connection (Open VPN, PPTP, IPSEC, VPN)
  • Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
  • Versatile modes & event alarm by e-mail
  • 1KV isolation for PoE P.D. port (IGR-20+)
  • Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
  • Rigid IP-30 housing design
  • DIN-Rail and Wall-mount enabled

Overview

IGR-20 series is a reliable VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 2 modes of routing function: Dynamic/Static IP route, PPPoE authentication. In addition, IGR-20+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGR-20+ is one of the best solution for applications of VPN connection.

Specifications

ORing Router Model IGR-20 IGR-20+
Physical Ports  
10/100/1000 Base-T(X) Ports in RJ45Auto MDI/MDIX 2
Sim Card Slot - Present at ETH2Fully compliant with IEEE 802.3af Power DevicespecificationOver load & short circuit protectionIsolation Voltage: 1000 VDC min.Isolation Resistance : 108 ohms min
5-Pin Terminal Block 2(DI x 4 and DO x 4) :Dry Contact:On: short to GND, Off: openWet Contact (DI to COM/GND):On: 0 to 3VDC, Off: 10 to 30VDC
LED Indicators  
Power Indicator 3 x LEDs, PWR1(2)(PoE) / Ready:Red On : Power is on and booting upGreen On : Power is on and functioning Normal
10/100/1000T RJ45 port indicator 2 x LEDs,LNK/ACT:Green for port Act.Speed: Green for port Link at 1000MbpsAmber for port Link at 100Mbps.Off for port Link at 10Mbps
Fault 1 x LED, Red for Ethernet link down or power down indicator
Fault Contact  
Relay Relay output to carry capacity of 1A at 24VDC
Power  
Redundant Input power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption 4 Watts 5 Watts
Overload current protection Present
Reverse polarity protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight (g) 845 g 850 g
Environmental  
Storage Temperature -40 to 85°C(-40 to 185°F)
Operating Temperature -40 to 75°C (-40 to 167°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years