Wide Voltage GWR Router Series is designed to provide remote connectivity over cellular networks especially for customers who require a power supply from 9 to 36 VDC. Low transmission delay and very high data rates offered by existing cellular networks completely eliminate the need for expensive wired infrastructure.
Main features
- Wide Voltage, power supply from 9 to 36 VDC
- Robust system for mission critical applications
- Complete set of advanced features
- User friendly web based configuration interface
- Top rated CLI for IT professionals
- Dedicated Remote Management and Monitoring System
- Dual SIM card support
- Multiple failover options
- Advanced system log for performance monitoring
- Cost effective solution
Overview
GWR series brings scalability of even most demanding corporate networks to the highest possible level. Installing a reliable, high performance backup solution for existing land lines or satellite networks is now a simple task thanks to modern cellular networks. Therefore, no matter if the goal is to provide primary internet access or backup solution for already existing network GWR router series represents a top rated solution.
Specifications
RF characteristics
- UMTS/HSPA+
850/900/1900/2100 MHz (Huawei module)
900/2100 MHz (Cinterion module)
Transfer rate (max): 14.4 Mbps down, 5.76 Mbps up
Note: UMTS/HSPA+ transfer rate limited to 12 MBps due to USB 1.1 Full Speed interface limitations
- GSM/GPRS/EDGE+
850/900/1800/1900 MHz (Huawei module)
Transfer rate (max): 236.8 Kbps down, 236.8 Kbps up
900/1800 MHz (Cinterion module)
Transfer rate (max): 384 Kbps down, 384 Kbps up
Interfaces and connectors
- 1x embedded interface GSM/GPRS/EDGE/UMTS/HSPA+
- Dual SIM slots with protective cover (Push-Pull)
- GSM: 2xSMA female connectors (50 Ω) for external antennas
- 1 x Ethernet interface 10/100 Base-T, RJ-45 connector
- 1 x Serial RS-232 interface, Pinout 1: RTS, 2: DTR, 3: TX, 4: GND, 5: GND, 6: RX, 7: DSR, 8: CTS
- 1 x USB Host 1.1 interface, full speed 12 MBps, connector type A
Status LED
- Ethernet activity/network traffic
- Power on
- GSM link activity
- GSM signal strength (5 LED’s)
- Reset
Power requirements
- Input: 9-36VDC / 1000mA
- AC Power Supply: 100-240 VAC 50/60 Hz, standard temperature range (optional: extended temperature range)
Environmental
- Operating temperature: -40° C to +75° C
- Storage temperature: -40° C to +85° C
- Relative humidity: 5% to 95% (non-condensing)
- IP rating: IP30
Housing
- Robust steel sheet 0.8 mm, optional DIN rail mounting kit
Dimensions and weight
- Size (W x D x H): 95 x 135 x 35 mm
- Weight: 380 gr
