Managed redundant ring PoE Ethernet switch with 4x10/100/1000Base-T(X) IEEE 802.3at P.S.E. ports and 2x100/1000Base-X SFP ports
Main features
- Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
- Open-Ring support the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- 4 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
- Support PoE scheduled configuration and PoE auto-ping check function
- Support IEEE 1588v2 clock synchronization
- Support IPV6 new internet protocol version
- Support Modbus TCP protocol
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Provided HTTPS/SSH protocol to enhance network security
- Support SMTP client and NTP server
- Support IP-based bandwidth management
- Support application-based QoS management
- Support Device Binding security function
- Support DOS/DDOS auto prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support ACL, TACACS+ and 802.1x User Authentication for security
- Supports 9.6K Bytes Jumbo Frame
- Multiple notification for warning of unexpected event
- Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Support LLDP Protocol
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
Overview
IGPS-9042GP-24V is a managed redundant ring PoE Ethernet switch with 4x10/100/1000Base-T(X) IEEE 802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9042GP-24V also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9042GP-24V switch has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40°C to 75°C. IGPS-9042GP-24V can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed PoE and Fiber Ethernet application.
Specifications
| ORing Switch Model | IGPS-9042GP-24V |
| Physical Ports | |
| 10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX | 4 |
| 100/1000Base-X SFP port | 2 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol )IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)IEEE 1588v2 clock synchronizationIEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| PoE Output Watts | 12 ~24VDC : 60Watts Max.24 ~ 57VDC : 120Watts Max. |
| MAC Table | 8k |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switch Properties | Switching latency: 7 usSwitching bandwidth: 12GbpsMax. Number of Available VLANs: 4095VLAN ID Range : VID 1 to 4094IGMP multicast groups: 128 for each VLANPort rate limiting: User Define |
| Jumbo frame | Up to 9.6K Bytes |
| Security Features | Device Binding security featureEnable/disable ports, MAC based port securityPort based network access control (802.1x)VLAN (802.1Q ) to segregate and secure network trafficRadius centralized password managementSNMPv3 encrypted authentication and access securityHttps / SSH enhance network security |
| Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (O-Ring) with recovery time less than 30ms over 250 unitsTOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN taggingIGMP SnoopingIP-based bandwidth managementApplication-based QoS managementDOS/DDOS auto preventionPort configuration, status, statistics, monitoring, securityDHCP Server/Client/RelaySMTP ClientModbus TCPNTP server |
| Network Redundancy | O-RingOpen-RingO-Chain*noteMRPMSTP (RSTP/STP compatible) |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 |
| LED Indicators | |
| Power Indicator | Green : Power LED x 3 |
| Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode |
| O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring modeGreen Blinking : Indicates that the Ring is broken. |
| Fault Indicator | Amber: Indicate unexpected event occurred |
| 10/100/1000Base-T(X) RJ45 Port Indicator | Green for port Link/Act.Dual color LED for speed indicator : Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| Fault Contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Redundant Input Power | Dual DC inputs. 12~57VDC on 6-pin terminal block. |
| Power Consumption (Typ.) | 8.9Watts (power device not included) |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Not Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 54.3 (W) 108.5 (D) x 157.6 (H)mm(2.14 (W) x 4.27 (D) x 6.2 (H)inch) |
| Weight (g) | 765g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | 5 years |
