IPMC-111PB

Ethernet to fiber PoE media converter, mini type, with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket

Main Features

• 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
• Ethernet to fiber with SFP socket
• LFP (Link Fault Pass-through) function
• full/half duplex operation mode
• P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts
• Supports store and forward transmission
• Provided DIP-Switch to set operation mode
• High reliability and rigid IP-30 housing
• DIN-Rail and panel mounting enabled

Overview

IPMC-111PB is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB supports MDI/MDIX auto detection, so you don?t need to use crossover wires. IPMC-111PB also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPMC-111PB has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB with wide operating temperature range from -40°C~70°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments. IPMC-111PB also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB is reliable media converter with PoE capability and can satisfy most demand of operating environment

Ordering Information